Using the ProCurve Web Browser Interface
Web Configuration
Enabling LACP
1.On the LACP Setting page, click the box under the column labeled “LACP Enabled on Port” for the ports you want to enable LACP.
2.Input a key value for the Link Aggregate Group.
3.Click APPLY.
Disabling LACP
1.On the LACP Setting page, click the box under the column labeled “LACP Enabled on Port” to remove the check mark for the ports you want to disable LACP.
2.Click APPLY.
N o t e | Do not enable LACP or static trunks for ports 1 and 2 at the same time. Doing |
| so will result in the switch resetting to factory default configuration when |
| power cycled. |
|
|
Field Attributes
•Port – The port number.
•LACP Enabled on Port – Allows LACP to be enabled or disabled. When the box is checked, LACP is enabled.
•Key Value (0..255, 0 means autogenerated key) – Ports in an aggregated link group must have the same LACP port Key. For a port to be allowed to join an aggregated group, the port Key must be set to the same value. When set to zero, the port Key is automatically set by the switch.
Web ProCurve the Using Interface Browser