Using the ProCurve Web Browser Interface

Using the ProCurve Web Browser Interface

Web Configuration

•Speed/Duplex Status – Shows the current speed and duplex mode.

–10HDX

–10FDX

–100HDX

–100FDX

–1000FDX

•Flow Control Status – Indicates whether flow control is enabled or disabled.

•Auto-negotiation– Shows if auto-negotiation is enabled or disabled.

•Frame Type – Either “Tagged” or “All”. “Tagged” means that the port will only receive VLAN-tagged frames. When set to “All,” the port will also receive untagged frames.

•PVID – The VLAN ID assigned to untagged frames received on the interface. Outgoing frames are tagged unless the frame’s VLAN ID is the same as the PVID. When the PVID is set to “None,” all outgoing frames are tagged. (Default: 1)

Trunk/LACP Information

•Trunk/LACP – The trunk label. “T1” through “T12” on the 24-port switch and “T1” through “T4” on the 8-port switch are used as trunk labels.

•Type – Displays the trunk type as “Static” or “Dynamic.”

•Trunk/LACP Status – Indicates the speed and duplex setting of the trunk.

–10HDX

–10FDX

–100HDX

–100FDX

–1000FDX

•Ports – The ports that are members of the trunk.

VLAN Information

•VLAN ID – A number in the range 1 - 4094 which identifies the VLAN.

•VLAN Member – A list of the ports that are members of the VLAN. By default, all ports are members of VLAN 1.

2-6