Interpreting control panel lights
This section briefly explains some of the messages that might appear on the printer lights display.
Printer light indication | Explanation and recommended action |
|
|
No lights are on. | The printer is off. |
| ▲ Press (Power button). |
The Power light is on. | The printer is ready. |
| ▲ No action is required. |
The Power light blinks. | The printer is turning on or off or | |
| processing a print job, or a print job has | |
| been cancelled. | |
| ▲ No action is required. | |
| The printer is pausing for the ink to dry. | |
| ▲ No action is required. Wait for the ink | |
| to dry. |
|
|
| |
The Power light is on and the Resume light blinks. | The printer is in manual duplex mode. It is | |
| waiting for the ink to dry so the pages can | |
| be flipped over and reloaded. | |
| ▲ Reload the stack into the printer and | |
| press | (Resume button). |
| The printer has printed a banner, and the | |
| banner needs to be removed from the | |
| printer. |
|
| ▲ Press (Resume button) to remove | |
| the banner from the printer. | |
| The width of the paper in the In tray does | |
| not match the width selected in the printer | |
| driver. |
|
| ▲ Reload paper of the required width in | |
| the In tray, and then press (Resume | |
| button). |
|
| The printer carriage has stalled. | |
| ● Press | (Resume button) to continue |
| printing. |
|
● If the error persists, turn the printer off, and then on again. See Troubleshooting.
106 Chapter 8 Printer lights reference | ENWW |