Transparencies

●Insert transparencies with the rough side down and the adhesive strip pointing towards the back of the printer.

●Use the Best mode to print transparencies. This mode provides longer drying time and ensures that the ink dries completely before the next page is delivered to the output tray. Allowing wet media to stack up might cause smearing.

Custom-size media

●Use only custom-size media supported by the printer.

●If your application supports custom-size media, set the media size in the application before printing the document. If not, set the size in the printer driver. You might need to reformat existing documents to print them correctly on custom-size media.

Understanding specifications for supported media

This section provides information regarding the sizes, types, and weights of media that the printer supports. It also provides information on the tray capacity.

NOTE An automatic two-sided printing accessory (duplex unit) comes with the HP Officejet Pro K850dn Color Printer.

Supported media sizes

Media size

Input tray

Front manual

Rear manual

Auto duplex

Manual duplex

 

 

feed slot

feed slot

(duplex unit)

 

Standard paper sizes

U.S. Letter

(215.9 by 279.4 mm; 8.5 by 11 inches)

Legal

(215.9 by 355.6 mm; 8.5 by 14 inches)

Super B

(330 by 483 mm;

13 by 19 inches)

A4

(210 by 297 mm;

8.3by 11.69 inches)

Executive

(184.15 by 266.7 mm; 7.25 by 10.5 inches)

ENWW

Selecting print media 13