Loading small media

To load small media in the input tray

NOTE You can also use the front manual feed slot. If you are printing on thick paper (such as cardstock), you can use the rear manual feed slot. See Printing with the front or rear manual feed slot.

1.Raise the output tray and remove any media from the input tray.

2.Insert a stack of media that does not exceed the height of the paper guide, print-side down along the right side of the input tray until it stops.

3.Open the small media guide by moving it 90 degrees clockwise from start to end position.

4.Press the button on top of the paper guide and slide the guide to the right until it stops at the edge of the media.

ENWW

Loading small media 23