Printer light indication | Explanation and recommended action | |
|
| |
The Power light is on and the Resume light and Paper Jam light blink. | Print media is jammed in the printer. | |
| ● | Press (Resume button) to eject the |
|
| jammed media. |
| ● | Remove all media from the output tray. |
|
| Locate and clear the jam (see Clearing |
|
| jams). After clearing the jam, press |
|
| (Resume button) to continue the print |
|
| job. |
|
| |
The Power light is on and the Resume light and Out of Paper light blink. | The printer is out of paper. | |
| ▲ Load paper and then press | |
|
| (Resume button). |
The Power light and the Door Open light are on.
A cover is not closed completely.
▲Make sure all covers are completely closed.
The Power light is on and the Door Open light blinks. | The |
| |
| is not inserted completely. |
| ▲ Make sure the |
| the duplex unit is inserted completely |
| in the back of the printer. |
|
|
The Power light is on, and the Door Open and Printhead lights are on. | The printhead latch is not secured. |
| ▲ Open the top cover and press down |
| firmly on the printhead latch to ensure |
| that it is secured properly. |
The Power light is on, and the Printhead light and one or more of the color indicator lights blink.
One or more of the printheads needs attention.
●Reinstall the appropriate printheads, close all covers, and then try to print.
●If the error persists, turn the printer off, and then on again.
●If the error persists, clean the printhead contacts (see Maintaining the printheads).
●If the error persists, replace the printhead or printheads indicated. See HP supplies and accessories for information about ordering supplies.
ENWW | 107 |