To connect the printer before installing the software
If you connected the printer to the computer before installing the printer software, the Found New Hardware wizard appeared on the computer screen.
NOTE If you have turned on the printer, do not turn off the printer or unplug the cable from the printer while the installation program is running. If you do so, the installation program will not finish.
1.In the Found New Hardware dialog box that provides the option for selecting a method to locate the driver, select the advanced option and click Next.
NOTE Do not allow the Found New Hardware wizard to perform an automatic search for the driver.
2.Select the check box for specifying the driver location, and then ensure that the other check boxes are clear.
3.Insert the Starter CD into the
4.Browse to locate the root directory on the Starter CD (for example, D:), and then click OK.
5.Click Next, and then follow the onscreen instructions.
6.Click Finish to close the Found New Hardware wizard. The wizard automatically starts the installation program (this might take a short time). For Windows 98 and Windows Me, you must complete the installation program if you wish to install a
7.Complete the installation process.
NOTE The setup program provides options to install
To share the printer on a locally shared network
In a locally shared network, the printer is connected directly to the USB or parallel connector of a selected computer (known as the server) and is shared by other computers (clients).
ENWW | Configuring the printer (Windows) 49 |