Unpacking

Be sure to read through “Lifting the TV” for important information.

Unpack the TV and put it on a stable surface:

1Use the cardboard holders on either side of the TV to remove it from the box.

2Remove the cardboard; however, keep the wrapping on the TV to protect it while moving.

3Lift the TV onto the installation location.

Lifting the TV

The TV is heavy; be sure to use ergonomically correct lifting procedures when moving the TV.

Due to the size and weight of the TV, it is recommended that a minimum of two people move it.

To transport the TV, grasp the display in the area under and above the screen.

Move the product gently. Never place the TV with the glass screen facing downward, unless it is protected with pads.

Attaching or removing the stand

Your TV comes with a stand that must be attached to the display. Reverse these steps to remove the stand.

c

CAUTION: Use two people to assemble the TV.

Before attaching the stand, unplug the AC cord from the AC input.

1Locate the TV stand (two pieces), eight screws of mounting hardware, and tool from the box.

2Place the base onto the pedestal, insert four short screws, and tighten using the provided tool.

3Carefully place the TV panel with the glass screen facing downward on a padded, stable table. Position the bottom of the TV near the edge of the table.

w

WARNING: Do not drop the stand onto the TV.

8HP LCD HDTV User’s Guide