HP LC3760N 37 inch Using the Setup Menu, Setting the antenna using the Air/Cable option, Scanning for channels using the CH Search option, Using CH Setup, Starting EZ Setup, Yes

Using the Setup Menu

The Setup menu options depend on the current input source; items appear that apply for the selected input.

For example, Parental CTRL (used to select a secret number and set the values for parental controls by TV rating, TV content, and movie ratings) does not appear when the selected input is Input 4 or 5 (HDMI).

Setup menu	Description
EZ Setup	Starts guided setup.
CH Setup	Scans for channels.
Antenna	Displays air-broadcasted
Setup — Digital	digital TV signal and channel
	strength.
Parental CTRL	Enables and defines parental
	controls for TV and movies.
Input Skip	Sets the TV to skip the HDMI
	connectors (Input 4 or Input 5)
	when selecting the input
	source.
Position	Adjusts image position on the
	screen.
Input Label	Selects a name (from a list)
	for the input source.
Picture Flip	Sets the orientation of the
	picture.
Standby Mode	Sets the TV mode for standby.
Language	Sets the OSD language.
Reset	Sets Setup options to the
	factory preset values. Does
	not change the Channel
	Setup, Parental CTRL
	password, or Language
	settings.

Starting EZ Setup

Select EZ Setup to start the first-time setup wizard.

To start EZ Setup:

1Press Menu on the remote control.

2Press the up or down arrow buttons to highlight Setup. Press OK.

3Highlight EZ Setup, and then press OK.

4If you set the Secret No., enter your 4-digit secret number. See “Secret number setting for parental control” on page 35.

5Follow the setup wizard instructions. For more information, refer to “Using the First-Time Setup Wizard” on page 19.

Using CH Setup

If the initial setup does not find all the channels, use CH Setup to manually select the antenna and search for each missing channel.

Setting the antenna using the Air/Cable option

The Air/Cable option defines what type of antenna or cable is connected to the TV input.

If channels are missing, or no channels are found after running CH Search, check your antenna connection, and then perform CH Setup again.

Scanning for channels using the CH Search option

The CH Search option makes the TV look for all channels viewable from the signal cable connected to the TV input.

1In the CH Search menu, highlight Yes for Air Analog & Digital, Cable Analog, or Cable Analog & Digital.

2Highlight Search Start, and press OK.

The scan automatically searches the selected inputs for channels.

30HP LCD HDTV User’s Guide