Adjusting Advanced settings

The Advanced options depend on the input source.

■Color Temp sets the white balance in increments from High to Low; choose High for white with blue tones and Low for white with red tones.

■Black sets the viewing depth automatically by adjusting the dark portion of an image; set to On for high detail in black portions of the image.

■3D-Y/Csets the response for minimal dot crawl and cross-color noise for video input signals from Composite Video or Analog In. Choose Standard for normal adjustment, Fast for a movie image, or Slow for a still image.

■Monochrome sets color to monochrome for viewing video without color. Set to On for monochrome.

■Film mode automatically detects a film-based source (originally encoded at 24 frames per second), analyzes, and then recreates each still film frame for high-definition picture quality. Set to On for automatic conversion of a film source.

■Range of OPC selects the image brightness minimum and maximum range for the OPC sensor automatic adjustments. OPC must be set to On.

Using Reset

To return all adjustment options to the factory preset values, highlight Reset and press OK, and then highlight Yes and press OK.

Using the Audio Menu

The Audio menu sets the sound levels and the option for the Surround Sound setting.

The Audio menu is not selectable when the Output Select option in the Option menu is set to Variable.

Audio menu Options

Treble[scale]

Bass[scale]

Balance[scale]

Surround Off/On

ResetYes/No

Adjusting the audio

In the Audio menu, select an item and adjust the scale for Treble, Bass, or Balance. These options are not selectable when Surround is set to On.

Set Surround to On to enjoy surround sound.

To control the audio output, including muting the speakers, refer to the Output Select option in “Using the Option Menu” on page 32.

Using Reset

To return all adjustment options to the factory preset values, highlight Reset and press OK, and then highlight Yes and press OK.

Using the

Power Control Menu

The Power Control menu sets options to allow you to save energy by choosing to turn off the TV:

■When there is no signal for 15 minutes.

■When there is no operation for 3 hours.

Power control menu

Options

 

 

No Signal Off

Disable/Enable

 

 

No Operation Off

Disable/Enable

 

 

Changing the TV Settings

Changing the TV Settings 29