Symptom (Continued) | Remedy |
|
|
The unit cannot be operated. | ■ External influences such as lightning and static electricity may cause |
| improper operation. In this case, operate the unit after first turning on |
| the power of the TV or unplugging the AC cord and replugging it in |
| after 1 or 2 minutes. |
|
|
The color is strange, faded, or | ■ Adjust the picture tone. |
misaligned. | ■ Is the room too bright? The picture may look dark in a room that is |
| too bright. |
| ■ Check the input signal setting. |
| ■ If watching a component device, make sure the red, blue, and green |
| cables are fully inserted into the proper connectors on both ends. |
|
|
The power suddenly turned off. | ■ Is the sleep timer set? |
| ■ Check the power control settings. |
| ■ The unit’s internal temperature has increased. Remove any objects |
| blocking the vent, or clean the vent. |
|
|
Viewing questions |
|
|
|
Symptom | Remedy |
|
|
I get a poor picture with video signal | Check the following: Improper control setting. Local interference. Cable |
input. | interconnections. Adjust picture control as needed. Try another location |
| for the TV. Be sure that all connections are secure. |
|
|
There is no picture or a black screen, | ■ Press the Source button on the remote control, and confirm the source |
and I have an external device | is selected. |
controlling the TV. | ■ Verify that the external device power is turned on. |
| ■ Check to see whether the source component is connected. |
| ■ Check the power management function. Is it in standby mode? |
| ■ Connect the source to the TV. Operate the external device. |
|
|
The picture, with a component input | ■ Check to make sure each cable is plugged into the correct color- |
source connected, is too red, blue, | coded connector on the TV conncectors and input source connectors. |
or green. | ■ Make sure the cables are plugged in all the way. |
|
|
50HP LCD HDTV User’s Guide