4Insert the assembled stand into the opening on the bottom of the TV.

5Insert four long screws into the holes on the back of the TV and tighten using the provided tool.

Connecting the TV signal source

w

WARNING: Before connecting the TV to any other electronic device, unplug the TV and electronic device AC cords from the AC input.

The following is an explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna/cable terminal at the rear of the TV set.

■A 75-ohm system is generally a round cable with an F-type connector that can easily be attached to a terminal without tools (sold separately).

■A 300-ohm system is a flat, twin-lead cable that can be attached to a 75-ohm terminal through a 300/75-ohm adapter (sold separately).

6Carefully lift the TV and set it upright.

Setting Up the TV

Set up the TV by connecting cables and connecting the power cord.

n

An F-type connector should be finger- tightened only. When connecting the RF cable to the TV set, do not use tools to tighten the F-type connector, as it may cause damage to your TV set.

C

A

B

A:75-ohm coaxial cable, round

B:300-ohm twin-lead cable, flat

C:F-type connector

Setting Up

Setting Up 9