Channel search
Channel search automatically searches for a signal from all available channels:
1Press the left arrow and right arrow buttons on the remote control to select Yes or No for Air Analog & Digital, and then press the down button to move down.
2Press the left arrow and right arrow buttons on the remote control to select Yes or No for Cable Analog, and then press the down button to move down.
3Press the left arrow and right arrow buttons on the remote control to select Yes or No for Cable Analog & Digital, and then press the down button to move down.
4Select Search Start, and then press OK.
Example
MENU [Setup ... CH Setup ... CH Search]
ANALOG | Air [ 25 ] | Found [ 20 ] |
|
|
|
MENU [Setup ... CH Setup ... CH Search]
DIGITAL | Air [ 25 ] | Found [ 20 ] |
|
|
|
MENU [Setup ... CH Setup ... CH Search]
DIGITAL | Cable [ 25 ] | Found [ 25 ] |
|
|
|
Air ANALOG
2
Audio : MONO
n
If no channel is found, check the input connection to your TV, and run the EZ setup again using the Setup menu; see “Starting EZ Setup” on page 30.
20HP LCD HDTV User’s Guide