Using the Remote Control

Operating the TV

The remote control operates the TV. To use the remote control, point the remote control at the remote control sensor on the display.

1Press and open the cover on the back of the remote control.

2Insert the batteries into the remote control, and make sure that you match polarities.

3Close the cover.

5m

n

30º

Use the remote control within a distance of

16.4feet (5 meters) from the front of the TV remote control sensor window and at the maximum horizontal and vertical angles of 30 degrees.

Using universal remote controls

When you want to program a universal remote control to operate your HP TV, if HP is not listed in the supported brand codes, use a Philips TV code. The HP remote control transmits Philips-licensed remote control codes.

After programming your universal remote control with a Philips TV code, it can operate your HP TV functions for volume, mute, power, and input source.

Installing or replacing remote control batteries

Insert two AAA non-rechargeable batteries into the remote control, ensuring that you place them with the proper polarity.

Do not mix different types of batteries together (for example, alkaline and carbon-zinc) or old batteries with fresh ones.

Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.

When not using the remote for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

Do not try to recharge batteries that are not intended to be recharged; they can overheat and rupture. Follow the battery manufacturer’s directions for the batteries you are using.

Always remove batteries as soon as they become weak. Weak batteries can leak and severely damage the unit. The battery life depends on how much the remote control is used. Replace batteries when remote control operation becomes erratic.

Do not take apart the batteries, heat them, or throw them into a fire.

Using the Remote Control

Using the Remote Control 21