Top cover

NOTE: The top cover spare part kit includes the TouchPad board and cable, TouchPad button board and cable, and TouchPad bracket.

Description

Spare part number

 

 

For use only on computer models equipped with a fingerprint reader (includes fingerprint reader and

651375-001

cable)

 

 

 

For use only on computer models not equipped with a fingerprint reader

651374-001

 

 

Before removing the top cover, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 41), and then remove the following components:

a.Service access cover (see Service access cover on page 42.)

b.Base enclosure (see Base enclosure on page 66.)

c.System board (see System board on page 69.)

Remove the top cover:

1.Turn the computer upside down, with the front toward you.

2.Remove the wireless cables from the routing channels (1). Remove WLAN 1 and WWAN 5 from the left channel (2). Remove WLAN 2 and WWAN 3 and 6 from the right channel (3).

3.Remove the two Phillips M2.0x7.0 screws (4) from the hinges.

Component replacement procedures 71

Page 79
Image 79
HP LJ461UT manual Top cover