Smart card reader
Description | Spare part number |
|
|
Smart card reader (includes cable) | |
|
|
Smart card reader bracket | |
|
|
Before removing the card reader board and bracket, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 41), and then remove the following components:
a.Service access cover (see Service access cover on page 42.)
b.Keyboard (see Keyboard on page 62.)
c.Base enclosure (see Base enclosure on page 66.)
d.Top cover (see Top cover on page 71.)
Remove the smart card reader board and bracket:
1.Open the ZIF connector (1) for the smart card cable, and remove the cable (2).
2.Disconnect the cables (3) and (4) from the TouchPad.
3.Remove the Philips M2.0x3.0 screw (5) that secures the smart card reader board to the top cover, and then remove the smart card reader board (6).
Reverse this procedure to install the smart card reader board, cable, and bracket.
76 Chapter 4 Removal and replacement procedures