Display components
NOTE: For removal of the display panel alone, see Display panel on page 77). To remove internal display components, remove the display panel, and then continue with the procedures in this section.
Description | Spare part number |
|
|
Webcam module (select models only), includes microphone and keyboard light | |
|
|
Hinge covers | |
|
|
Display Hinge Kit (includes left hinge and bracket, and right hinge and bracket) | |
|
|
Before removing the internal display components, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 41), and then remove the following components:
a.Display panel (see Display panel on page 77.)
b.Service access cover (see Service access cover on page 42.)
c.Keyboard (see Keyboard on page 62.)
d.Base enclosure (see Base enclosure on page 66.)
To replace the webcam module, follow these steps:
1.Disconnect the webcam module cable (1) from the webcam module.
2.Gently pry the outside edge (2) of the module away from the display enclosure.
80 Chapter 4 Removal and replacement procedures
