Modem module
NOTE: The modem module spare part kit does not include a modem module cable. The cable is included in the Cable Kit, spare part number
Description | Spare part number |
|
|
Modem module (56k v.92 MDC data/fax modem) | |
|
|
Before removing the modem module, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 41).
5.Remove the service access cover (see Service access cover on page 42).
Remove the modem module :
1.Remove the Phillips M2.0×3.0 screw (1) that secures the modem module to the system board.
2.Lift the modem module (2) straight up to remove it from the system board.
3.Disconnect the modem module cable (3) from the modem module.
Reverse this procedure to install the modem module.
Component replacement procedures 55