2. Install the Batteries

1.Open the Battery/Memory card door on the side of the camera by sliding the door toward the front of the camera.

2.Insert the batteries as indicated inside the door.

3.Close the Battery/Memory card door by pushing the door down and sliding the door toward the back of the camera until the door latches.

For the performance of NiMH, Lithium, and Alkaline batteries when used with this camera, see Performance per Battery Type on page 152. For the number of shots you can expect to get for each battery type based on usage, see Number of Shots per Battery Type on page 153. For hints on optimizing battery performance, see Appendix A, Managing Batteries, starting on page 149.

TIP: You can also use an optional HP AC power adapter to power the camera. If you use rechargeable NiMH batteries, you can recharge the batteries in the camera using the optional HP AC power adapter or optional HP Photosmart M-series dock, or recharge the batteries separately in the optional HP Photosmart quick recharger. For more information, see Appendix B, Purchasing Camera Accessories, starting on page 159.

12 HP Photosmart M22/M23 User’s Manual