Message

Possible Cause

Solution

 

 

 

ERROR SAVING

The optional

• Always wait until the

IMAGE.

memory card that

Power/Memory light

or

is installed was

stops blinking before

ERROR SAVING

removed before

removing the memory

VIDEO.

the camera

card from the camera.

 

finished writing

• With the camera

 

to the card or

turned off, remove the

 

was half-locked.

memory card and

 

 

check to see if the

 

 

locking tab on the

 

 

edge of the card is fully

 

 

in the unlocked

 

 

position.

 

 

 

Cannot display

The image was

• The image may still be

image

taken with

okay. Transfer the

<filename>.

another camera

image to a computer

 

or the image file

and try opening it with

 

was corrupted

the HP Image Zone

 

when the camera

software.

 

was shut down

• Do not remove the

 

improperly.

memory card when the

 

 

camera is turned on.

 

 

 

Camera has

The camera may

Turn the camera off, if it is

experienced an

have

on, and then on again. If

error.

experienced a

that does not fix the

or

transient

problem, try resetting the

Camera has

problem.

camera (see page 104). If

experienced an

 

the problem persists, note

error and is

 

the error code and then

shutting down.

 

call HP Support (see

 

 

page 142).

 

 

 

Troubleshooting and Support 135