HP Photosmart M22, M23 manual 122

Problem	Possible Cause	Solution
My image is	There was not	• Use Image Advice (see
too dark	enough light.		page 72).
(continued).		• Wait for natural lighting
			conditions to improve.
		•	Add indirect lighting.
		• Use the flash (see
			page 40). This is called
			fill-flash.
		•	Increase the EV
			Compensation (see
			page 56).
		• Use Adaptive Lighting (see
			page 52).
	A light is behind	•	Use the Flash On setting
	the subject.		(see page 40) to brighten
			the subject.
		•	Increase the EV
			Compensation (see
			page 56).
		• Use Adaptive Lighting (see
			page 52).
	Your finger	Be sure to move your fingers
	blocked the	away from the flash when you
	flash.	take a picture.
	The Display	Set the Display Brightness in
	Brightness	the Setup Menu to Medium or
	needs to be	High (see page 94).
	adjusted.
My image is	The ISO Speed	• Use Image Advice (see
grainy.	setting was too		page 72).
	high.	• Use a lower ISO Speed
			setting (see page 59).

122 HP Photosmart M22/M23 User’s Manual