Printing Images Directly from the Camera

You can connect the camera directly to any PictBridge-certified printer to print images. To determine if your printer is PictBridge-certified, look for the PictBridge logo on your printer.

1.Check that the printer is turned on. There should be no blinking lights on the printer or error messages displayed about the printer. Load paper into the printer, if needed.

2.Connect your camera to the printer.

a. Make sure the camera’s USB Configuration setting is set to Digital Camera (see USB Configuration on page 97).

b. Using the USB cable that came with your camera, connect the

larger, flat end of the USB cable to the corresponding connector on the PictBridge-certified printer.

TIP: The PictBridge connector is usually located on the front of the printer.

3.Open the door on the side of the camera nearest the lens and connect the small end of the USB cable to the USB connector on the camera.

Transferring and Printing Images

89