Selecting from the Advanced Menu

Troubleshooting

	Table 2-4
	Advanced Menu

Select	To Do This

Language (or press f2)	Change the Computer Setup language.

Boot options	■ Enable/Disable MultiBoot, which sets a startup
	sequence that can include most bootable
	devices and media in the system.
	■ Set the boot order.

Device options	■ Swap the functions of the fn key and left ctrl
	key.
	■ Enable/Disable multiple pointing devices at
	startup. (To set the computer to support only a
	single, usually nonstandard, pointing device at
	startup, select Disable.)
	■ Enable/Disable USB legacy support for a USB
	keyboard, mouse, and hub. When USB legacy
	support is enabled
	❐ A USB keyboard, mouse, and hub work
	even when a Windows operating system
	is not loaded.
	❐ The computer starts from a bootable hard
	drive, diskette drive diskette, or CD,
	CD-RW, or DVD inserted into a drive
	connected by a USB connector to the
	computer or to an optional docking
	device.
	■ Select a parallel port mode: EPP (Enhanced
	Parallel Port), standard, bidirectional, or ECP
	(Enhanced Capabilities Port).
	■ Enable/Disable all settings in the SpeedStep
	window. (When Disable is selected, the
	computer runs in Battery Optimized mode.)

2–6	Maintenance and Service Guide