Using the Projector

Powering On the Projector

1.Make sure the power cord and signal cable are securely connected.

2.Make sure the projector is perpendicular to the projection screen.

✎If the projector cannot be placed perpendicular to the screen, use the Image Control adjustment in the OSD menu to adjust horizontal keystoning. Refer to Chapter 3, “Using the On-Screen Display Menu,” for more information

3.Remove the lens cap 1 from the projector by pressing in on the tabs on either side of the lens cap and pulling it straight out.

4.Press the Power/Standby button 2 on the top of the projector.

When the projector has warmed up, the Compaq startup screen displays and the LED on the Power/Standby button turns green.

2–6

Compaq iPAQ Microportable Projector MP3800 User’s Guide