Using the Projector
Powering Off the Projector
1.Press the Power/Standby button 1 to turn off the projector lamp.
The message “Going to Standby” displays and the LED on the Power/Standby button blinks amber. Allow the projector to cool down.
ÄCAUTION: Wait until you see a steady amber LED (approximately
45 seconds) before turning the projector back on. Failure to follow this caution can result in damage to the projector.
2.Once the Power/Standby LED has turned steady amber, disconnect the power cord from the electrical outlet and the projector 2.
Compaq iPAQ Microportable Projector MP3800 User’s Guide |
