HP Velocity troubleshooting | Troubleshooting procedures |
Displaying Target Loss Rate
To display the currently configured Target Loss Rate (TLR):
1.On the HP Velocity server system,
2.Select Management.
3.Click Configuration.
4.Select LiveQ in the navigation tree.
The configured TLR value appears in the LiveQ - Target Loss Rate Filters dialog. See the “LiveQ Policy Filters” section of the HP Velocity Server Side Deployment Guide.
Displaying latency mitigation configuration
To display the currently configured latency mitigation parameters:
1.On the HP Velocity server system,
2.Select Management.
3.Click Configuration.
4.Select LiveTCP in the navigation tree.
The configured latency mitigation parameters (latency threshold and congestion control) for configured protocols appear. See the “Configuring LiveTCP latency mitigation” section of the HP Velocity Server Side Deployment Guide.
Displaying flow information
To display flow information:
1.On the HP Velocity server system,
2.Select Management.
3.Click Flow Information.
The Flow Information tab displays detailed information about each unique HP Velocity- protected flow.
| Statistic name | Description |
|
|
|
| Remote IP | The remote IP address for the protected flow. |
|
|
|
| Remote Port | The remote TCP or UDP port number for the protected flow. If the port |
|
| number is a |
|
|
|
|
|
|
HP Velocity FAQ and Troubleshooting Guide | 28 |
