HP mt40 Mobile Adding a port to the transparent policy filter, Validating HP Velocity deployment

HP Velocity troubleshooting Troubleshooting procedures

Adding a port to the transparent policy filter

To add a port to the transparent filter:

1.On the HP Velocity server system, right-click the system tray icon.

2.Select Management.

3.Click Configuration.

4.Select Policy Filters in the navigation tree.

5.In the Port pane, enter a port number in the Transparent TCP Ports or Transparent UDP Ports field as appropriate. Separate each entry with a space.

6.Click Apply.

For more information, see the “Policy Filters (Port & IP)” section of the HP Velocity Server Side Deployment Guide.

Validating HP Velocity deployment

Valid HP Velocity deployments are described in the “Deployment Configurations” chapter of the HP Velocity Server Side Deployment Guide.

To validate the version of HP Velocity:

1.On the HP Velocity server system, right-click the HP Velocity system tray icon.

2.Select About.

Figure 6 shows the HP Velocity version (1.4.1), edition (Server), and release number (6005).

Figure 6. About HP Velocity dialog

HP Velocity FAQ and Troubleshooting Guide 30