Removal and Replacement Procedures
✎The following screws should be loosened and installed in the 1, 2, 3, 4 sequence stamped on the heat sink.
4.Loosen the four Phillips PM2.5×8.0 shoulder screws 1 that secure the heat sink to the computer.
✎Due to the adhesive quality of the thermal paste located between the heat sink and processor, it may be necessary to move the heat sink from side to side to detach the heat sink from the processor.
5.Lift the right side of the heat sink 2 until it disengages from the processor.
6.Slide the heat sink 3 to the right and remove it.
Removing the Heat Sink
Maintenance and Service Guide |