
Removal and Replacement Procedures
5.3Preparing the Computer for Disassembly
Before you begin any removal or installation procedures:
1.Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power cord.
Battery Spare Part Number Information
|
|
4.Remove the battery by following these steps:
a.Turn the computer upside down with the rear panel toward you.
b.Slide the battery release latch on the right 1 and then the battery release latch on the left 2 to release the battery.
c.Slide the battery pack 3 straight back and remove it.
Removing the Battery Pack
Reverse the above procedure to install the battery pack.
Maintenance and Service Guide |