Removal and Replacement Procedures

8.Release the zero insertion force (ZIF) connector 1 to which the keyboard cable is connected and disconnect the keyboard cable 2 from the system board.

Step 9 applies to models with keyboards with pointing sticks.

9.Release the ZIF connector 3 to which the pointing stick cable is connected and disconnect the pointing stick cable 4 from the system board.

Disconnecting the Keyboard and Pointing Stick Cables

10. Remove the keyboard.

Reverse the above procedure to install the keyboard.

5–22

Maintenance and Service Guide

Page 112
Image 112
HP nx8420, nw8440 manual Disconnecting the Keyboard and Pointing Stick Cables