Removal and Replacement Procedures

2.Remove the two Phillips PM2.5×4.0 screws 1 that secure the modem board to the system board.

3.Lift the right side of the modem module 2 to disconnect it from the system board.

4.Disconnect the modem cable 3 from the modem module.

5.Remove the modem module.

Removing the Modem Module

Reverse the above procedure to install the modem module.

5–54

Maintenance and Service Guide

Page 144
Image 144
HP nx8420, nw8440 manual Reverse the above procedure to install the modem module