OptiPrinter PRO CD/DVD Inkjet Printer
SECTION 7: INSTALLING THE PRINTER SOFTWARE
Note:
Your OptiPrinter PRO should not be connected to your PC during the initial software installation. If connected, remove the USB and power cables from the printer. There may be variations in the following instructions depending on operating system (2000 or XP) and configuration.
1.Place the Printer Driver CD into the
2.Follow the
3.The Digital Signature Not Found message box will appear (see Fig.11). You will be asked if you wish to continue installation, select Yes. In Windows XP, select Continue Anyway.
4.On the final screen click Finish.
5.Connect the OptiPrinter Pro to your PC via the USB cable.
6.Connect the power cable to the back of the OptiPrinter Pro and plug into the power supply. Switch on the printer.
7.If the Digital Signature Not Found message box appears again, select Yes to continue installation. In Windows XP, select Continue Anyway.
8.The Found New Hardware box will appear on screen, which will search for the driver. In Windows XP select No, not at this time and click Next.
9.At the next box, select Install the software automatically (Recommended) and click Next.
10.If the Digital Signature Not Found message box appears again, select Yes to continue installation. In Windows XP, select Continue Anyway.
11.When prompted, click Finish.
Fig. 11
Note:
The message, which appears above, is merely precautionary from Windows and it is not necessary to stop the installation.
Note:
If your PC does not recognize the new OptiPrinter PRO hardware when you first connect it to your PC, you should load the print driver via the Add Printer icon on your Printer settings:
a.Place the Print Drive CD into your PC’s
b.On you PC’s desktop, select Start, Settings and Printers
c.Double click the Add Printer icon and follow the on screen instructions
ZZ 004 821 | - 12 - |
