ADTRAN ADT-1234POE manual NetVanta VPN Accelerator Card Installation

Models: ADT-1234POE

1 76
Download 76 pages 6.9 Kb
Page 60
Image 60

Unit Installation

NetVanta 1000/1000R Series Hardware Installation Guide

 

 

Installing the NetVanta VPN Accelerator Card (included in P/N 4200368L1)

The optional VPN Accelerator card plugs into a 32-bit PCI slot and is designed to be used in the

NetVanta 1224STR to provide encryption/decryption and security acceleration services. The card provides the following security services to the host processor: DES, triple-DES (3DES), AES, SHA-1, MD5, and random number generation. Performance metrics include 528 Mbps (DES), 176 Mbps (3DES), and 422 Mbps (AES). The power consumption of the card does not exceed 2 watts.

The AOS Enhanced Feature Pack software is required to take advantage of the VPN acceleration features of this card.

The NetVanta VPN accelerator card is intended to be serviced/installed by qualified service personnel only.

 

Instructions for Installing the NetVanta VPN Accelerator Card

 

 

Step

Action

1Remove power from the unit.

2Remove the nine screws and, if necessary, two mounting brackets (see Figure 40).

3Using a 3/16-inch hex driver, remove the two jack screws located on either side of the DB-9 port.

4Carefully lift and remove the unit’s cover to expose the circuit board.

5Gently slide the accelerator card into the PCI slot as shown. The card is keyed to fit into the slot only one way. To avoid damaging the card pins, do not use excessive force.

6Replace the unit cover, screws, and mounting brackets.

7Restore power to the unit.

Figure 40. NetVanta VPN Accelerator Card Installation

60

Copyright © 2008 ADTRAN, Inc.

61200500L1-34N

Page 60
Image 60
ADTRAN ADT-1234POE manual NetVanta VPN Accelerator Card Installation