Unit Installation

NetVanta 1000/1000R Series Hardware Installation Guide

 

 

Mounting Options

The unit may be installed in rackmount, wallmount, or tabletop configurations. The following sections provide step-by-step instructions for rack mounting and wall mounting.

If you have purchased the VPN Accelerator Card for your NetVanta 1224STR, install it first (refer to Installing the NetVanta VPN Accelerator Card (included in P/N 4200368L1) on page 60).

Rack Mounting the NetVanta

The NetVanta is a 1U-high, rack-mountable unit that can be installed into a 19-inch equipment rack. The following steps guide you in mounting the NetVanta into a rack.

Instructions for Rack Mounting the NetVanta

Step

Action

1To allow proper grounding, scrape the paint from the rack around the mounting holes where the NetVanta will be positioned.

2Position the NetVanta in a stationary equipment rack. This unit occupies 1U of space.

3Have an assistant hold the unit in position as you install two mounting bolts through the unit’s brackets and into the equipment rack using a #2 phillips-head screwdriver.

4Apply power to the unit (refer to Supplying Power to the Unit on page 56).

Be careful not to compromise the stability of the equipment mounting rack when installing this product.

54

Copyright © 2008 ADTRAN, Inc.

61200500L1-34N

Page 54
Image 54
ADTRAN ADT-1234POE manual Mounting Options, Instructions for Rack Mounting the NetVanta Step Action