ADTRAN ADT-1234POE manual NetVanta 1224 Rear Panel Design, Status LED, Power Connection

NetVanta 1000/1000R Series Hardware Installation Guide Physical Descriptions

NetVanta 1224 Front Panel Features

10/100BaseT Ethernet Interfaces

The NetVanta 1224s contain 24 10/100BaseT Ethernet interfaces (RJ-45). These interfaces are consecutively numbered 1 through 24, from left to right, with the numbers screened directly above each port. Status LEDs for each of these interfaces are located directly over these numbers.

The NetVanta 1224 PoE also has green and red PoE status LEDs located in the upper left and upper right corners (respectively) of each Ethernet connector.

Status LED

The STAT LED, which indicates the unit’s status, is located to the lower left of RJ-45 port 1.

Figure 1. NetVanta 1224 Front Panel Layout

Figure 2. NetVanta 1224 PoE Front Panel Layout

NetVanta 1224 Rear Panel Design

The NetVanta 1224 and NetVanta 1224 PoE rear panel is shown below. Refer to Appendix A on page 67 for pinouts.

Figure 3. NetVanta 1224 and NetVanta 1224 PoE Rear Panel Layout

NetVanta 1224 Rear Panel Interfaces

CONSOLE Interface

The CONSOLE interface is an EIA-232 serial port (DCE) that provides for local management and configuration (via a DB-9 female connector).

Connection directly to an external modem requires a cross-over cable.

Power Connection

The rear panel has a power input to the AC universal power supply. Please refer to Supplying Power to the Unit on page 56 for connection details.

61200500L1-34N Copyright © 2008 ADTRAN, Inc. 17