ADTRAN ADT-1234POE manual NetVanta 1224R Shipping Contents, NetVanta 1224R Front Panel Design

NetVanta 1000/1000R Series Hardware Installation Guide Physical Descriptions

NetVanta 1224R Shipping Contents

Each NetVanta 1224R and NetVanta 1224R PoE unit is shipped in its own cardboard shipping carton. Open each carton carefully, and avoid deep penetration into the carton with sharp objects.

After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged in transit, immediately file a claim with the carrier and contact ADTRAN Customer Service (refer to the Repair and Replacement section of the Support page on the ADTRAN website at http://www.adtran.com/support).

Domestic shipments of the NetVanta 1224R include the following items:

•NetVanta 1224ST base unit

•AOS Documentation CD

•A detachable power cable with a grounded, three-prong plug

•Quick Start Guide

•Warranty card

International shipments of the NetVanta 1224R include the following items:

•NetVanta 1224ST base unit

•AOS Documentation CD

•All necessary power cords

•Quick Start Guide

•Warranty card

NetVanta 1224R Front Panel Design

The NetVanta 1224R and the NetVanta 1224R PoE front panels are shown below. Table 1 on page 33 describes all of these LEDs, and Appendix A on page 67 shows the connector pinouts.

NetVanta 1224R Front Panel Features

10/100BaseT Ethernet Interfaces

The NetVanta 1224R and the NetVanta 1224R PoE contain 24 10/100BaseT Ethernet interfaces (RJ-45). These interfaces are consecutively numbered 1 through 24, from left to right, with the numbers screened directly above each port. Status LEDs for each of these interfaces are located directly over these numbers.

The NetVanta 1224R PoE also has green and red PoE status LEDs located in the upper left and upper right corners (respectively) of each of the Ethernet connectors.

61200500L1-34N Copyright © 2008 ADTRAN, Inc. 21