ADTRAN ADT-1234POE manual NetVanta Serial NIM P/N 1200866E1, Operating Mode, Serial Interface

NetVanta 1000/1000R Series Hardware Installation Guide Option Modules

NetVanta Serial NIM (P/N 1200866E1)

The NetVanta Serial NIM (shown in Figure 30) can be configured by the user as a V.35, X.21 (V.11), or EIA 530 interface. This module supports rates up to a maximum of 10 Mbps. An additional V.35 (ADTRAN

P/N 1200873L1), X.21 (ADTRAN P/N 1200874L1), or EIA 530 (ADTRAN P/N 1200883L1) cable is required (refer to Caution, below). See Table A-12on page 71 for the serial connector pinouts, and page 73 for the DBU connector pinouts. An optional DIM is required for dial backup applications.

Cable length for the Serial NIM should not exceed 25 feet.

SERIALDBU

Figure 30. NetVanta Serial NIM

Features and Specifications

Operating Mode

•DTE only

Serial Interface

•Supported Standards: ISO 4903 (X.21), CCITT V.35 Synchronous (V.35), EIA 530 Synchronous

•Provides V.35, X.21 (V.11), or EIA 530 electrical interface

•Connector: 26-pin smart serial (DTE)

Compliance

•EMC - see Electromagnetic Compatibility (EMC) Table on page 6.

•ETSI TBR1

•ETSI TBR2

•EN 60950

•IEC 60950

•UL/CUL 60950

•AS/NZS 60950

•RoHS Compliant (Telecommunications exemption)

Environmental

•Operating Temperature: 0°C to 50°C

•Storage Temperature: -20°C to 70°C

•Relative Humidity: Up to 95 percent, noncondensing

Physical

•Dimensions: 2.75-inch W x 4.25-inch D

61200500L1-34N Copyright © 2008 ADTRAN, Inc. 43