ADTRAN ADT-1234POE manual NetVanta Dual T1 NIM P/N 1200872L1, T1 Interface

Option Modules NetVanta 1000/1000R Series Hardware Installation Guide

NetVanta Dual T1 NIM (P/N 1200872L1)

The NetVanta Dual T1 NIM (see Figure 27) provides two T1 WAN interfaces for the NetVanta. See Table A-6on page 69 for the pinouts. See page 73 for the DBU connector pinouts. An optional DIM is required for dial backup applications.

WAN T1/1 WAN T1/2 DBU

Figure 27. NetVanta Dual T1 NIM

Features and Specifications

Operating Modes

•Frame Relay, Multilink Frame Relay

•PPP, Multilink PPP

•HDLC

T1 Interface

•Supported Standards: AT&T TR 62411, AT&T TR 65016, ANSI T1.403, Bellcore TR 194

•Line Rate: 1.544 Mbps +75 bps

•Line Code: AMI or B8ZS

•Framing: D4 (SF) or ESF

•FT1 Line Rate: DS0 channelized (multiples of 64 kbps)

•Input Signal: 0 to -36 dB (DS1)

•Line Build-Out: 0, -7.5, -15, -22.5 dB (long), 0 to 655 ft (short)

•DS0 Assignment: Programmable

•Connector: RJ-48C

Clock Source

•Network

•Internal

•Through

Diagnostics

•Test Pattern Generation and Detection: QRSS, 511, 215 - 1, 220 - 1, all ones, all zeros

•Network loopbacks (local and remote); responds to both inband and FDL loop codes

•Alarm generation detection

•Network performance data (15 minutes and 24 hours)

Compliance

•EMC - see Electromagnetic Compatibility (EMC) Table on page 6.

•ACTA/FCC Part 68

•IC CS-03

•UL/CUL 60950

Environmental

•Operating Temperature: 0°C to 50°C

•Storage Temperature: -20°C to 70°C

•Relative Humidity: Up to 95 percent, noncondensing

Physical

•Dimensions: 2.75-inch W x 4.25-inch D

40 Copyright © 2008 ADTRAN, Inc. 61200500L1-34N