ADTRAN ADT-1234POE NetVanta 1224STR Front Panel Design, Gigabit Ethernet Interfaces/SFP Slots

Physical Descriptions NetVanta 1000/1000R Series Hardware Installation Guide

•AOS Documentation CD

•A detachable power cable with a grounded, three-prong plug

•Quick Start Guide

•Warranty card

International shipments of the NetVanta 1224STR include the following items:

•NetVanta 1224STR base unit

•AOS Documentation CD

•All necessary power cords

•Quick Start Guide

•Warranty card

NetVanta 1224STR Front Panel Design

The NetVanta 1224STR and the NetVanta 1224STR PoE front panels are shown below. Table 1 on page 33 describes all of the LEDs, and Appendix A on page 67 shows the connector pinouts.

NetVanta 1224STR Front Panel Features

10/100BaseT Ethernet Interfaces

The NetVanta 1224STRs contain 24 10/100BaseT Ethernet interfaces (RJ-45). These interfaces are consecutively numbered 1 through 24, from left to right, with the numbers screened directly above each port. Status LEDs for each of these interfaces are located directly over these numbers.

The NetVanta 1224STR PoE also has green and red PoE status LEDs located in the upper left and upper right corners (respectively) of each Ethernet connector.

Gigabit Ethernet Interfaces/SFP Slots

The NetVanta 1224STR front panel contains one Gigabit Ethernet interface that provides one fixed RJ-45 connector and one standard SFP slot for fiber connectivity. (Use either the RJ-45 connector or the SFP slot. The fiber slot has precedence.) This interface is labeled G1, and the status LED is located to the left of RJ-45 port 1, above the STAT LED.

The NetVanta 1224STR PoE front panel contains two Gigabit Ethernet interfaces and two standard SFP slots. (Use either the RJ-45 connectors or the SFP slots. The fiber slots have precedence.) These interfaces are labeled G1 and G2, and the status LEDs are located above the SFP slots.

24 Copyright © 2008 ADTRAN, Inc. 61200500L1-34N