ADTRAN ADT-1234POE manual Antenna Installation Instructions

Models: ADT-1234POE

1 76
Download 76 pages 6.9 Kb
Page 65
Image 65

NetVanta 1000/1000R Series Hardware Installation Guide

Unit Installation

 

 

Antenna Installation Instructions

 

Instructions for Installing the 3G NIM Antennas

Step

Action

1Remove power from the base unit.

2Place either of the two antennas directly onto the antenna port labeled ANT1 on the rear panel.

3Using the thumb screws only, carefully thread the antenna onto the connector until it is secure.

4Repeat Step 2 with the second antenna, attaching it to the ANT2 (diversity) port.

5Once both antennas are secured, the antennas can be flexed at the joint to increase reception.

6Position antennas in a “V” shape at a 90 degree angle to each other, as shown in Figure 43.

90

ANT1ANT2

WWAN RSSI

1xRTT EVDO

3G NIM (CDMA)

Figure 43. Proper Antenna Alignment

Your NetVanta is now ready to be configured and connected to the network. For more information on configuration for a specific application, refer to the quick configuration documents provided on the AOS Documentation CD. For details on the CLI, refer to the AOS Command Reference Guide (also included on your CD).

61200500L1-34N

Copyright © 2008 ADTRAN, Inc.

65

Page 65
Image 65
ADTRAN ADT-1234POE manual Antenna Installation Instructions, Instructions for Installing the 3G NIM Antennas