Solution 3: Clean the electrical contacts
Solution: Clean the cartridge electrical contacts.
To clean the electrical contacts
1.Make sure the product is turned on.
2.Open the cartridge access door by lifting the blue access handles on the side of the product, until the door locks into place.
The print carriage moves to the center of the product.
NOTE: Wait until the print carriage stops moving before proceeding.
3.Locate the ink cartridge that is indicated in the error message, and then press the tab on the ink cartridge to release it from the slot.
4.Hold the ink cartridge by its sides with the bottom pointing up and locate the electrical contacts on the ink cartridge.
The electrical contacts are four small rectangles of copper or
Solve a problem
Errors 113