Chapter 10

b. Connect the Ethernet cable to the Ethernet port on the back of the HP Photosmart.

c. Connect the other end of the Ethernet cable to an available port on your Ethernet router or switch.

setup Network

2.Install software.

3.View the animation for this topic.

Related topics

“Install the software for a network connection” on page 66

WiFi Protected Setup (WPS)

To connect the HP Photosmart to a wireless network using WiFi Protected Setup (WPS), you will need the following:

￿A wireless 802.11 network that includes a WPS-enabled wireless router or access point.

￿A desktop computer or laptop with either wireless networking support, or a network interface card (NIC). The computer must be connected to the wireless network that you intend to install the HP Photosmart on.

60 Network setup