To check your margin settings

1.Preview your print job before sending it to the product.

In most software applications, click the File menu, and then click Print Preview.

2.Check the margins.

The product uses the margins you have set in your software application, as long as they are greater than the minimum margins the product supports. For more information about setting margins in your software application, see the documentation that came with the software.

3.Cancel the print job if the margins are not satisfactory, and then adjust the margins in your software application.

Cause: The settings were not set correctly.

Reset the product

Solution: Turn off the product, and then unplug the power cord. Plug the power cord back in, and then press the On button to turn on the product.

Cause: The product experienced an error.

Contact HP support for service

Solution: If you have completed all of the steps provided in the previous solutions and are still having a problem, contact HP support for service.

Go to: www.hp.com/support.

If prompted, choose your country/region, and then click Contact HP for technical support.

Cause: You might need assistance to enable the product or software to function properly.

Solve a problem

Memory card troubleshooting

Use this section to solve these memory card problems:

•The product does not read the memory card

•The photos on the memory card do not transfer to my computer

•Photos in a connected digital camera with PictBridge do not print

The product does not read the memory card

Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.

•Solution 1: Insert the memory card properly

•Solution 2: Remove the additional memory card

•Solution 3: Reformat the memory card in your digital camera

Memory card troubleshooting

91