After you finish setting up Scan to Network Folder, the HP software automatically saves the configurations to the printer.
To set up Scan to Network Folder, complete the following steps for your operating system.
Windows
1.Open the HP Printer Software. For more information, see Toolbox (Windows).
2.
3.Follow the onscreen instructions.
NOTE: After you create destination folders, you can use the printer’s EWS to customize the scan settings for these folders. On the last screen of the Scan to Network Folder Wizard, make sure the Launch embedded web server when finished check box is selected. When you click Finish, the EWS is displayed in your computer’s default web browser. For more information about the embedded web server, see Embedded web server.
Mac OS X
1.Open HP Utility. For more information, see HP Utility (Mac OS X).
2.Click Scan to Network Folder under the Scan Settings section, and then follow the onscreen instructions.
NOTE: You can customize the scan settings for each destination folder.
Embedded web server (EWS)
1.Open the embedded web server (EWS). For more information, see Embedded web server.
2.On the Home tab, click Network Folder Setup in the Setup box.
3.Click New, and then follow the onscreen instructions.
NOTE: You can customize the scan settings for each destination folder.
4.After you have entered the required information about the network folder, click Save and Test to make sure the link to the network folder is working correctly. The entry is added to the Network Folder list.
Set up Scan to Email
You can use the printer to scan documents and send them to one or more email addresses as
NOTE: Scan to Email is only supported by HP Officejet Pro 8600 Plus and HP Officejet Pro 8600 Premium.
To use the Scan to Email feature, complete the following preliminary steps:
Set the Outgoing Email Profiles
Set up HP Digital Solutions | 55 |