Chapter 1

NOTE: Remove all originals from the document feeder tray before lifting the lid on the printer.

Load media

This section provides instructions for loading media into the printer.

This section contains the following topics:

•Load standard-size media

•Load envelopes

•Load cards and photo paper

•Load custom-size media

Load standard-size media

To load media

Use these instructions to load standard media.

1.Pull out Tray 1.

2.Insert the media print-side down in the center of the tray. Make sure the stack of media aligns with the line on the width guide, and is not higher than the paper stack line on the guide.

NOTE: Do not load paper while the printer is printing.

3.Slide the media guides in the tray to adjust them for the media size that you have loaded, and then reinsert the tray.

24 Get started