10Setting Up Your New HP OfficeJet R Series

9Lower each print-cartridge latch down onto the top of the cartridge, and push down until the latch locks firmly into place.

	10 Close the print-cartridge access door.
NOTE
NOTE	Both print cartridges must be correctly installed (with the green tab and blue tape
	removed) for your HP OfficeJet to work. Make sure that the following things are done
	before continuing:
	•	Cartridges are pushed firmly into their slots.
	•	Cartridge labels are facing toward you.
	•	Both print-cartridge latches are down and locked.
	•	Print-cartridge access door is closed and latched.
	•	IN tray is pushed in completely.
	•	Paper length adjuster is pushed firmly against the paper stack.
	•	OUT tray is fully down.

HP r45, r65 manual 10Setting Up Your New HP OfficeJet R Series