Further information on all operational tape drive parameters for all tape device types may be found in the manual supplied with your system titled ‘AIX DPX/20 System Management Guide OS & Devices’ in the section ‘Tape Drive Attributes’.
2.2.4 Update the config.tape fileA minimum device 0 needs to be specified to install mvEnterprise. The config.tape file contains 32 lines of data representing devices 0 to 31 respectively. For example, to make rmt1 the default tape drive, or device 0, the first line in config.tape should be:
/dev/rmt1.1
where the suffix 1 signifies that the tape device rmt1 is a
mvEnterprise Release 4.1 on AIX | Installation Guide | Page 47 |