HP Raining DataCorp. mvEnterprise manual Create a Database to Store mvEnterprise Data

7.Select TYPE of file system, then press the List key to display the existing file system types. Select the appropriate type and press

Enter.

8.Press the Enter key to mount the file system. The Command Status screen displays, confirming the successful mounting of the file system.

2.3.4Create a Database to Store mvEnterprise Data

The config file is updated by the install program while it creates a database on the file systems, which were set up above. During the software installation, the install procedure prompts:

Enter initial data base names:

When done, type “end”.

In the above example, type /mvefs/mvelv00/DB where DB is a user selected name. It is recommended that the -ioption (to initialize the database) be used with the install program. If multiple database files are to be created on the same file system, a unique name is needed for each of the DB files. In the example below, two database files are created:

0/mvefs/mvelv00/DB0

0/mvefs/mvelv02/DB1 end

mvEnterprise Release 4.1 on AIX Installation Guide Page 57