HP RP3 3100 manual 23Installing the Riser Card Hardware Upgrades

8.To remove the riser card, pull back the arm on the back of the riser card socket (1), then lift the riser card out of the riser card socket (2).

Figure 2-22Removing the Riser Card

9.To install the new riser card, press the riser card firmly down into the riser card socket on the system board. Make sure that the tab on the end of the riser card bracket seats into the slot on the chassis when installing the card.

Figure 2-23Installing the Riser Card

22 Chapter 2 Hardware Upgrades