HP RP3 3100 manual 29Removing the Hard Drive from the Carrier Hardware Upgrades

7.Press outward on the release latch located on the front panel just above the cable connection on the hard drive (1), then slide the carrier toward the center of the chassis and pull the carrier straight back from the front panel to remove it (2).

Figure 2-28Removing the Hard Drive Carrier

8.Press the retention arm on the rear of the carrier outward (1), then slide the drive forward and lift it out of the carrier (2).

Figure 2-29Removing the Hard Drive from the Carrier

26 Chapter 2 Hardware Upgrades